Direct AC, No Rectifier
The AS10 / AS15 pair runs straight off 110 or 220 V AC line voltage: silicon-steel laminations suppress the eddy currents that would overheat a solid-core solenoid on AC. The AS10 delivers 1.5 kg of force over a 15 mm stroke at 138 g plunger weight (0.45 kg total); the AS15 stretches the same stroke to 2 kg of force. Both run at 50 or 60 Hz.
Key Specifications
| Model | Weight | Power @100% | @50% | @25% | @10% | Max ON @50% |
|---|---|---|---|---|---|---|
| SH-AS10-15 | see datasheet | — | — | — | — | see datasheet |
Source: SH-AS10-15 datasheet, Shih Shin Technology. Values are for reference and subject to design revision.
Force-Stroke Behaviour
Force is not a single number: it changes along the stroke, and each duty-cycle rating has its own curve. The full force-stroke chart is in the datasheet page below. When you specify, state the force you need at the working point of the stroke, not just the peak. Our guide to reading force-stroke curves and duty ratings explains the common selection traps.
Typical Applications
Linkage systems, valve actuators, counting devices, brake systems and feed hoppers on AC-powered machinery.
AS10 / AS15 Data
| Model | Stroke | Force | L×W×H | Plunger | Total weight |
|---|---|---|---|---|---|
| SH-AS10 | 15 mm | 1.5 kg | 93×53×50 mm | 138 g | 0.45 kg |
| SH-AS15 | 15 mm | 2 kg | 93×57×50 mm | 153 g | 0.5 kg |
Both: 110 / 220 V AC, 50 / 60 Hz.
Related Models
Series overview: AC laminated solenoids explained · Full AS range: 44-model index
Request a Quote or the Current Datasheet
Send your application parameters (voltage, stroke, force, duty cycle, quantity) and our engineers reply with a quotation or a custom proposal, typically within 24-48 hours on business days.
Request a Quote: Solenoid RFQ with Engineering Spec Checklist Email Our Engineering Team